- Updated for December 2024
- Based on 2024 UT commercial driver's license manual
Free UT CDL Double/Triple Trailers Practice Test 2024
Utah! Gorgeous, gorgeous Utah! From the Rocky Mountain regions and famous desert parks like Arches, Bryce Canyon, Canyonlands, Capitol Reef, and Zion (also called “The Mighty Five”) to its major urban areas like Salt Lake City, Utah has some of the most beautiful scenery this country has to offer. Expanding your resume with a Double/Triple Trailers (T) endorsement on your Utah Commercial Driver’s License (CDL) can immediately increase your job opportunities and earning potential. And the good news is that since you already have your CDL, you’ve done the heavy lifting! The remaining requirement is passing a 20-question multiple-choice knowledge test with a score of 80% (16 correct answers). That’s it! Once you pass this knowledge test, you’ll receive the “T” endorsement, granting you the ability to legally tow two or three trailers in authorized areas (Utah CDL Handbook 2024).
If you’re thinking about pulling double or triple trailers in the Beehive State, you must be at least 18 years of age. However, if you’re planning to cross state lines you’ll need to wait until you’re at least 21 years of age per federal law. This endorsement permits pulling doubles and triples, and on many roads in Utah, both configurations are allowed. Just don’t exceed 105 feet in length or a combined weight of 129,000 pounds! In Utah, double/triple trailers are often used for the transport of mining materials like copper, coal, and salt, industrial and manufacturing equipment, consumer goods and electronics (Salt Lake City is a major hub), and construction materials. From the rural areas, you’ll haul agricultural products like livestock, dairy, hay, and grains. Heard enough? Now let’s get you prepared!
Studying for this endorsement doesn’t have to be as overwhelming as you might think when you discover the huge amount of information available online. Our online Utah CDL Double/Triple Trailers practice test was created to match the format and types of questions you’ll face at the DMV without all the excess. With up-to-date (as of December 2024) multiple-choice questions that offer instant feedback on every answer, you’ll learn more efficiently than facing all of the feedback at one time at the end. What are you waiting for? Get ready, take your documents to the DMV, pay the fee to apply, and pass with flying colors.
- Perfect for first-time and renewal CDL/CLP applicants, and those adding endorsements
- Triple-checked for accuracy
What you need to know
What to expect on the actual UT DMV exam
questions
correct answers to pass
passing score
Helpful links
List of questions (classic view)
- When you're pulling more than one trailer, which trailer should be the first one behind the tractor?
- Which of these statements about quick steering movements and doubles/triples is true?
- You are driving a 100-foot double trailer combination at 50 mph. The road is dry and visibility is good. You should keep at least ____ seconds of space ahead of you.
- Before connecting a converter dolly to a second or third trailer, you should check the height of the trailer. The trailer height is right if
- You are driving a 100-foot double trailer combination at 30 mph. The road is dry and visibility is good. You should keep at least ____ seconds of space ahead of you.
- With the hand valve on, you should test the trailer brakes by opening the service line valve at the rear of the rig. When you do this, you should hear
- Empty trucks
- Which of these statements about handling doubles and triples is true?
- Before you can supply air to the air tanks of a second trailer, you need to
- You are driving with double trailers and must use your brakes to avoid a crash. For emergency braking, you should
- How can you be sure that you supplied air to a second trailer?
- What is likely to happen if the pintle hook is unlocked while the dolly is still under the second trailer?
- You want to hook your combination to a second trailer that does not have spring brakes. To do this without wheel chocks, you should
- Which of these statements about managing space to the sides is true?
- The crack-the-whip effect that troubles trucks with trailers is most likely to tip over
- You are visually checking the coupling of a converter dolly to the rear trailer. How much space should there be between the upper and lower fifth wheel?
- You are pulling doubles. A set of trailer wheels goes into a skid. Which of the following is most likely to occur?
- You are doing a walk-around inspection of a double or triple trailer rig. You should be sure that the converter dolly air tank drain valves are ______ and the pintle hook is _______.
- A converter dolly is
- A converter dolly consists of a ______ wheel and ________ axles.
- Alabama: Test 1 / Test 2
- Alaska: Test 1 / Test 2
- Arizona: Test 1 / Test 2
- Arkansas: Test 1 / Test 2
- California: Test 1 / Test 2
- Colorado: Test 1 / Test 2
- Connecticut: Test 1 / Test 2
- Delaware: Test 1 / Test 2
- District of Columbia: Test 1 / Test 2
- Florida: Test 1 / Test 2
- Georgia: Test 1 / Test 2
- Hawaii: Test 1 / Test 2
- Idaho: Test 1 / Test 2
- Illinois: Test 1 / Test 2
- Indiana: Test 1 / Test 2
- Iowa: Test 1 / Test 2
- Kansas: Test 1 / Test 2
- Kentucky: Test 1 / Test 2
- Louisiana: Test 1 / Test 2
- Maine: Test 1 / Test 2
- Maryland: Test 1 / Test 2
- Massachusetts: Test 1 / Test 2
- Michigan: Test 1 / Test 2
- Minnesota: Test 1 / Test 2
- Mississippi: Test 1 / Test 2
- Missouri: Test 1 / Test 2
- Montana: Test 1 / Test 2
- Nebraska: Test 1 / Test 2
- Nevada: Test 1 / Test 2
- New Hampshire: Test 1 / Test 2
- New Jersey: Test 1 / Test 2
- New Mexico: Test 1 / Test 2
- New York: Test 1 / Test 2
- North Carolina: Test 1 / Test 2
- North Dakota: Test 1 / Test 2
- Ohio: Test 1 / Test 2
- Oklahoma: Test 1 / Test 2
- Oregon: Test 1 / Test 2
- Pennsylvania: Test 1 / Test 2
- Rhode Island: Test 1 / Test 2
- South Carolina: Test 1 / Test 2
- South Dakota: Test 1 / Test 2
- Tennessee: Test 1 / Test 2
- Texas: Test 1 / Test 2
- Utah: Test 1 / Test 2
- Vermont: Test 1 / Test 2
- Virginia: Test 1 / Test 2
- Washington: Test 1 / Test 2
- West Virginia: Test 1 / Test 2
- Wisconsin: Test 1 / Test 2
- Wyoming: Test 1 / Test 2
Your go-to, trusted source
Experience the Driving-Tests differenceOur commitment to accuracy and quality in our practice tests
Explore our rigorous, multi-tiered verification process that ensures each question mirrors the official manual for unparalleled accuracy.
At Driving-Tests.org, we understand the importance of reliable and accurate practice tests to help you prepare for your DMV exam. That's why we've developed a meticulous process to create and continually update our practice questions, ensuring they reflect the most current driving laws and regulations.
Here's an inside look at how we maintain the highest quality in our practice tests.
Content Creation and Verification Process
- Alignment with Official Manuals:
Every question we develop is based on the most recent version of each state's official driving manual. Our team regularly monitors each state DMV's website for the latest updates to ensure our practice tests are always aligned with the most current information. - Community Feedback Integration:
We leverage feedback from our vast community of users to understand which topics are most frequently tested. This helps us focus on the areas that are most relevant and beneficial for your preparation. - Expert Content Creation:
Our in-house editor, Steven, who has extensive experience in driver education, crafts each question with precision. He conducts a thorough review of each question against the official manuals to ensure accuracy. - Rigorous Review Process:
Once Steven has finalized a set of questions, our team conducts a joint review session. This second level of scrutiny involves content accuracy, proofreading, and fact-checking to eliminate any errors. - User Feedback Mechanism:
After a question goes live on our site, we keep the lines of communication open. Each question features a feedback button, inviting users to report any issues or errors. This continuous feedback loop allows us to address and rectify any concerns promptly. - Responsive Updates:
In line with our commitment to accuracy, we quickly update our practice questions to reflect any changes in the DMV manuals. Additionally, we update the free electronic copy of the state's driver's license manuals on our site, typically within a few days after the DMV publishes them.
Our thorough quality control process ensures that you have access to practice tests that are as accurate and up-to-date as possible. We believe in the power of well-prepared drivers and are dedicated to providing you with the best study tools to help you succeed on your DMV exam.